pgmfi.org

Running Turboedit 2.6.1, 88 crx si with a d16a6 motor, dsm 450's and a gm 3 bar map sensor.

Im just getting around to tuning the part throttle, everything is pretty much mint but one spot in -11 to -12 vacuum where the a/f's read about 18:1 and the car bucks.

Now in TE, in those cells, the number is 5.96, thats the highest number that it will let me put in those cells and I cant adjust it.

http://putfile.com/pic.php?pic=main/8/2 ... .jpg&s=f10


What do I do?

heres a pic of my bin if anyone can help me. I will email the .bin file to you if you think there is something you can do for me, maybe it needs to be run on a different version or scaling or something.

Thanks

add 1 to the fuel multipliers in those 2 columns. i had the same prob before but in boost...

hth
phil

add 1 where? and how? I dont understand

I think he is saying go into the properties and select fuel multipliers, find those two columns you are having problems with and raise the number of the multiplier by 1. Guessing you have auto detect fuel multipliers -off?