pgmfi.org

I tried searching about this problem, but i cant seem to find anything on it. so, everytime I try to go into boost table adjustments to retard my ignition timing, i click on the icon that says to change it to retard by .75 degrees per psi but it will not stay there. no matter what i do i cant get it to change to .75 degrees- no changes are made. i have done it again and again but it never adjusts it. do i need to somehow load it like i do plug-ins? The program is crome.

it appears that crome takes the last vac column and applies the .75 (or whatever) to the rest of the columns. make sure the radio button is selected.

if you enter .75 in twice, nothing will change the second time around. The bin you have may already have .75 ret build in to it.. try .8 and see if the numbers change. or clear all the columns on the positive side to see what i mean.