type ek
#1 ◈ 2012-09-19
Had the shitty P2E that came in my 99 civic cx. i got a chipped p28 w/ hondata s200b and an OBD2b->OBD1 harness. Can i run a wire to the s200b? Do i just run a wire to the connector B Pin 12 (thats where vtec solenoid wire is suppose to b on the obd2b schematics page on ff-squad.com. or should i just connect it to the connector A Pin 4 of the p28 plug? thats also vtec solenoid. its all just very mind boggling!