a1k0n
#1 ◈ 2025-06-29
See
as well as
<http://sourceforge.net/projects/pgmfi/>
[%sig%]
as well as
<http://sourceforge.net/projects/pgmfi/>
[%sig%]
OBDI 66k assembler/disassembler.
blundar
#2 ◈ 2025-06-29
Re: OBDI 66k assembler/disassembler.
mad props.
[%sig%]
[%sig%]
blundar
#3 ◈ 2025-06-29
Re: OBDI 66k assembler/disassembler.
updated again... check sourceforge.
[%sig%]
[%sig%]
pelz
#4 ◈ 2025-06-29
Re: OBDI 66k assembler/disassembler.
Just to repeat from thread in GENERAL, for later use.
Anyone can get the MAC66K tools from Oki by just contacting them by e-mail. The compiler is no longer available.
Read the text below and use the e-mail address at the end of the text.
"Our basic policy is to provide these software tools to our customers
free of charge in order to enable the design-in of our semiconductor
products.
Even in this case of a discontinued product, where we cannot expect any
reasonable business, we normally are trying to give the requested
support.
However, our software tools should not be regarded as some kind of
freeware.
Therefore, we prefer to be contacted directly so that we have at least
to some degree control over the distribution of our tools.
Please, understand that and ask your friend to send me an e-mail.
Best regards
Michael Effkemann
OKI Electric Europe GmbH
meffkemann@oki.com
"
Greeting from Pelz
Anyone can get the MAC66K tools from Oki by just contacting them by e-mail. The compiler is no longer available.
Read the text below and use the e-mail address at the end of the text.
"Our basic policy is to provide these software tools to our customers
free of charge in order to enable the design-in of our semiconductor
products.
Even in this case of a discontinued product, where we cannot expect any
reasonable business, we normally are trying to give the requested
support.
However, our software tools should not be regarded as some kind of
freeware.
Therefore, we prefer to be contacted directly so that we have at least
to some degree control over the distribution of our tools.
Please, understand that and ask your friend to send me an e-mail.
Best regards
Michael Effkemann
OKI Electric Europe GmbH
meffkemann@oki.com
"
Greeting from Pelz
-Anton-
#5 ◈ 2025-06-29
I tried, but no respone since 3 weeks
I'll try to contact the person in question.
I live in the Netherlands, so germany is no problem.
the DASM622.EXE last version I tried to disassemble from a certain adres but it doesn't work. The older version works better for that.
example
DASM622.exe pw0.bin pw0.txt 3800
can anyone help me out ?
Anton
I'll try to contact the person in question.
I live in the Netherlands, so germany is no problem.
the DASM622.EXE last version I tried to disassemble from a certain adres but it doesn't work. The older version works better for that.
example
DASM622.exe pw0.bin pw0.txt 3800
can anyone help me out ?
Anton