pgmfi.org

got my dku-5 cable today from e-bay but upon stripping the ends i have no brown wire the wires i have are
the sheilding
green wire
red wire
yellow wire
blue wire
white wire
has anyone else used this cable
there is another post on here talking about the same cable( it has kq-u8a on it) but that cable has a brown and a lavender colour cable
ive opened up the cover on the chip but i cant get to the solder points to check
can anyone help me out please

White and the ground shield go together to PIN 1 (GND)
Red goes to RX PIN 2 (RX)
blue goes to TX PIN 4 (TX)
yellow and green are not used.

Tried it, works for my EGay cable.
Hope this helps.
Jay

yeah thanks ive just found a site for various pinout diagrams and got the same info from there

Hiya Mate,

Can you email me the link to the site with the pinouts and diagrams. Please send to: chris@ct-motorsport.co.uk

Cheer's Buddy

Regards

Chris

please email me link. jimjones07@sbcglobal.net and i have orange not red or is it the same wire. This is dku-5.

why not put the link up here for everyone to see???

As i also need this info. please.

x2

can somone please give ma a link to an sale on ebay for a known to be working cable?


thanks

i want to order 2 but i dont wanna end up buying the wrong one. cause i herd some stories on hmt about cables that didnt work.