My STEP-BY-STEP dataloggin to get you connected to your ECU!

irocz

#16 04 Aug 2005, 03:53 ◈ 2025-10-12

I leared how to datalog from this write up, Thanks. Now i am trying to use the auto adjust feature with no sucsess, and i have not found any info on the subject.

EG94R

#17 09 Aug 2005, 21:27 ◈ 2025-10-12

Re: can't connect

Rdeceptions wrote:

I am using a Moates Hulog and burner, P28 ecu all set up. Trying to get datalogging working, i will be getting the innovate wide band in a few weeks. i went through the whole process above step by step and all i get is Bad Response. Checksum is removed, datalog added. according to device manager the hulog is working fine, but i cant connect, any ideas? the map is a base P30, running a LS/VTEC with Type-R internals.

i have the same datalogging kit and ecu and the same problems can someone help.this is driving me crazy

Black R

#18 06 Mar 2006, 13:13 ◈ 2025-10-12

did this ever make it into the wiki?

it may be beneficial for the new users if you explain whether you're using crome pro or freelog, etc, for datalogging.....

ares650

#19 19 Jul 2006, 22:47 ◈ 2025-10-12

this should be a sticky!!! :lol:

TwoKSiR

#20 15 Jun 2008, 23:36 ◈ 2025-10-12

Re: My STEP-BY-STEP dataloggin to get you connected to your ECU!

is this for Crome Pro?

b20vtec2

#21 30 Oct 2009, 02:14 ◈ 2025-10-12

Re: My STEP-BY-STEP dataloggin to get you connected to your ECU!

i have j12 in my ecu what does it do and why should i remove it? also should i desolder it or just cut it?