// recovered archive

pgmfi.org wiki

honda / acura ecu development · TWiki library capture · forum archive →

OBD1 Civic Integra Auto Manual

Library.OBD1CivicIntegraAutoManual · r1.3 · · drdisco69

USDM RP17 and RP18 values:
J Automatic Manual
RP17 4.7k Ohm Open
RP18 2.7k Ohm Jumpered

JDM RP18 values:
J Automatic Manual
RP18 2.4k Ohm 1.4k Ohm

JDM Auto to Manual:
  • check on the back side in the middle side corner of the ecu. you'll find RP18 there.
  • you'll need to lower the value from 2.4k ohms to 1.4k ohms.

USDM Auto to Manual:
  • remove RP17 and RP18
  • replace RP18 with a jumper wire

USDM Manual to Auto:
  • remove jumper at RP18
  • add 4.7kOhm +/- 5% at RP18
  • add 2.7kOhm +/- 5% at RP17
  • add IC16 5050 S or equiv.
-(''need to finish... C91 and C78 ?'')
  • OBD1 auto vs manual notice jumper config in lower right along with the transistor config (thanks Katman):
    OBD1auto_manual.jpg

  • RP Array Before:
    RPOnBoard1.JPG

  • RP Array After:
    RPOnBoard2.JPG

Attachment: Modify: Size: Date: Who: Comment:
OBD1auto_manual.jpg mod 207111 25 Feb 2004 - 20:25 blundar OBD1 auto vs manual, thanks Katman
RPOnBoard1.JPG mod 158270 03 Apr 2005 - 03:44 drdisco69 RP Array Before
RPOnBoard2.JPG mod 157073 10 Feb 2006 - 20:34 drdisco69 RP Array After

Attachments