Cars · Electronics
OBD2P5M Auto Manual
This is a very simple conversion. Move the SMD 0 ohm resistor from location RP13 on the bottom of the PCB to location RP14 on the top of the PCB.
Adapted from pgmfi.org wiki
This is a very simple conversion. Move the SMD 0 ohm resistor from location RP13 on the bottom of the PCB to location RP14 on the top of the PCB. The 0 ohm SMD resistor is identified by code 000 etched on it.
Credits and source
Authors Jim Truett
Source Adapted from OBD2P5M Auto Manual on pgmfi.org wiki. Licensed under CC BY-NC-SA 1.0.