Project Two Tasks

Tasks for Team OBD0:

• Fix Idle in PM6 Dev ROM (completed)
• Fix Revlimiter in PM6 Dev ROM (completed)
• Fix Boost code in PM6 Dev ROM- NA to boost transition (completed)
• Find TPS enrichment routine
• Find IAT enrichment/correction routine
• Find Cold Start enrichment routine
• Implement closed loop disable
• Non-Oki MCU support
• RPM adjustment / scalars for high cam in vtec code
• Main fuel/timing table routine rewrite.

Fix Idle in PM6 Dev ROM (completed)

Current stable ROM (ng48) has good idle.

Fix Revlimiter in PM6 Dev ROM (completed)

Somehow got coded out

Fix Boost code in PM6 Dev ROM- NA to boost transition (completed)

Fixed.

Find TPS enrichment routine

help drivability with larger injectors. Currently over compensates with large injectors. Fix bogging when stomp gas

Assigned 12/1/04 - Dave

Rory says: "It looks like Dave may have found it, but I still need to test it."

Find IAT enrichment/correction routine

help drivability with larger injectors. Currently over compensates with large injectors.

Assigned 12/1/04 - Rory

Find Cold Start enrichment routine

help drivability with larger injectors. Currently over compensates with large injectors.

Finished 12.2.2004 - Rory: L365C called @ 09CB

Implement closed loop disable

ECU currently will apply O2 sensor code trim when boosting if at part throttle before open loop engages

Finished 2.7.2005 - Rory: Closed loop can now be disabled completely, or during boost only.

Non-Oki MCU support

Further code modifications necessary for generic 8051 / clones to run ROM code

RPM adjustment / scalars for high cam in vtec code

current RPM scale useless for high RPMs. Rewrite to allow better range / adjustable range for tuning vtec motors.

Main fuel/timing table routine rewrite.

Escape beyond bounds of 15x17... I'm fairly sure we've escaped that...