Nokia Cable Datalogging
Library.NokiaCableDatalogging · r1.3 · · nate
Jim Truett says: (original http://forum.pgmfi.org/viewtopic.php?t=1663)
I have found a very good adapter to link the TTL output from an ECU to a Laptop or PC with a USB port. The Prolific PL-2303 works perfectly, and offers a high speed conversion that prevents reading lag. The throttle position, vehicle speed, and RPM gauge are very linear, with no jittering.
The proper cable for this mod is Radio Shack part number 170-0787, or similar cables available on eBay for Nokia models 3200 series, 5100 series, and 6100 series. The pictures I have linked to show two different adapters. The larger one in the clear housing is the unit I purchased off of eBay. The black housing is the Radio Shack #170-0787. Both cables operate the same way, but the RS cable is somewhat more complex.
The modification to the cables are similar.
With the Radio Shack cable, cut off the phone connector. Strip back the shielding to expose about 1" of wire.
- Strip the brown wire and connect it to the shield conductor. Solder this to pin #1 on CN2.
- Strip the orange wire and solder it to pin #2 on CN2. This is the RX lead on the cable.
- Strip the red wire and solder it to pin #4 on CN2. This is the TX lead on the cable.
- Strip the black wire and connect it to the shield conductor. Solder this to pin #1 on CN2.
- Strip the white wire and solder it to pin #2 on CN2. This is the RX lead on the cable.
- Strip the blue wire and solder it to pin #4 on CN2. This is the TX lead on the cable.
| Attachment: | Modify: | Size: | Date: | Who: | Comment: |
|---|---|---|---|---|---|
| | mod | 28432 | 28 Mar 2005 - 20:50 | blundar | Top view of ebay cable with shell off |
| | mod | 27810 | 28 Mar 2005 - 20:51 | blundar | bottom view of ebay cable with shell off |
| | mod | 22058 | 28 Mar 2005 - 20:52 | blundar | Radio shack cable - bottom |
| | mod | 21188 | 28 Mar 2005 - 20:52 | blundar | radio shack cable top view |
Attachments
- 27 KB
- 28 KB
- 22 KB
- 21 KB