Auto To Manual
Most automatic ECUs can be converted to a 5spd rather easily. Going the other way often involves adding more components.
Adapted from pgmfi.org wiki
Most automatic ECUs can be converted to a 5spd rather easily. Going the other way often involves adding more components. At this time, it appears that the conversion can be done in either software OR hardware: most of the "mugen" ROMs disable the check for automatic transmission hardware, letting an automatic ECU run a 5spd engine w/o throwing a code 19 (auto trans lockup solenoid) You can also modify the hardware to make and auto ECU think it is a Manual. This is rather specific to each ECU.
- OBD0 ECU AUTO TO MANUAL WITHOUT REMOVE ANY HARDWARE = How to Run Auto ECU WITHOUT Check Engine!
- PS9 Auto Manual = How to turn a OBD0 PS9, PG7, PM7, PR5 or similar circuit boards into a PM6-ish manual ECU
- OBD0 PR4 Auto Manual = Converting an auto OBD0 PR4 to manual
- PR3 Auto Manual = Converting an auto PR3 to manual
- OBD1 Civic Integra Auto Manual = Converting an automatic 92-95 Civic and Integra ECU from auto to manual
- OBD1 P08 Auto Manual = Converting an automatic P08 or P30 JDM (mini style) ECU from auto to manual
- OBD1 P13 Auto Manual = Converting a 92-95 H22A prelude ECU from auto to manual
- OBD2 P5 MAuto Manual = Converting a 97-01 H22A Prelude PCM from auto to manual
Credits and source
Authors blundar, hackish, defensio
Source Adapted from Auto To Manual on pgmfi.org wiki. Licensed under CC BY-NC-SA 1.0.