Non Vtec-To-Vtec
In most cases, it is relatively simple to convert nonvtec ECUs to VTEC. The same PCB was used in several ECUs, with components added or left off as needed.
Adapted from pgmfi.org wiki
In most cases, it is relatively simple to convert non-vtec ECUs to VTEC. The same PCB was used in several ECUs, with components added or left off as needed. Look for a part number like "02D011F0-1500" which was used in many 94-95 Civic ECUs. In many cases, you might need to look at One Wire To4 Wire O2 Sensor or Auto To Manual as well. Conversion for 02 D01720-1500 boards Conversion for 02 D011 F0-1500 boards Conversion for 02 D01980-1500 boards Conversion for P14 to P13 (Which board?) Use 5050s as a VTEC driver for the above conversion
Credits and source
Authors blundar, b16a2
Source Adapted from Non Vtec-To-Vtec on pgmfi.org wiki. Licensed under CC BY-NC-SA 1.0.